- Published:
- Updated:
Hot swap in UPS systems: replacement without interruption
What hot swap means in UPS systems: replacing batteries, power modules, and fans during operation, when it is safe, and which UPS systems support it.
Short answer: hot swap means replacing a UPS component, usually batteries or power modules, without shutting down the UPS or interrupting power to equipment. It is a key feature for UPS systems protecting critical loads where no interruption is acceptable.
What hot swap means
UPS systems with components that can be replaced while the unit is running (hot swap). This architecture helps technicians carry out maintenance or repair faults without switching off the UPS and interrupting power to the supported equipment.
What can be hot-swappable
- Batteries: in UPS systems with slide-out battery packs, batteries can be replaced while the UPS supplies the load from the grid.
- Power modules: in modular UPS systems, a faulty module can be removed and replaced while the others continue supplying the load, as in the TEOS 900 series.
- Fans and communication cards: some models also allow replacement during operation.
Hot swap or external maintenance bypass
When a UPS does not support hot swap, uninterrupted maintenance uses a maintenance bypass switch at the electrical panel: the technician transfers the load directly to the grid, performs the work, and returns the load to the UPS. During this time, the load is not protected against outages, so the work is scheduled for a low-risk period.
Safety
Large UPS batteries are connected in series and carry dangerous DC voltage, while internal circuits remain charged even after disconnection. Hot swapping in large UPS systems must be performed only by a trained technician with appropriate tools. For small UPS systems with a battery access door, follow the manual's instructions.
For more information about UPS systems that support hot swap, you can contact the Tescom Hellas experts and they will be glad to help.
Frequently asked questions
Can I replace the battery without turning off the UPS?
Only if the UPS supports hot-swappable batteries, as stated in its specifications. Otherwise, shut down the UPS or transfer the load to bypass for replacement.
What is the difference between hot swap and bypass?
With hot swap, the load remains protected by the UPS during the work. With bypass, it is supplied directly from the grid without protection until the work is complete.
Need a UPS for a critical load with no interruptions, even during maintenance? Contact Tescom Hellas.