Skip to content
Tescom Hellas S.A.
Articles

AGM (VRLA) batteries: what they are and how long they last

How AGM VRLA batteries work, their lifespan in UPS systems, why they suit indoor use and how they differ from GEL batteries.

Short answer: AGM batteries are sealed lead-acid batteries (VRLA) with the electrolyte absorbed into glass fibers. They are maintenance-free, non-spillable and the most common type of UPS battery. In a UPS, they usually last 3–5 years, while long-life series can last up to 10–12 years under ideal conditions.

Since Alessandro Volta invented the battery, this energy-storage device has played an important role in powering our electronic equipment. For decades, batteries were the main source of electricity before electrical grids appeared, and they remain the main source in remote areas.

Over time, improvements in battery technology have contributed greatly to technological progress. Laptops, mobile phones, small electronic devices and UPS systems—now integral to our daily lives—would not be possible without electrical batteries. Today, batteries play a leading role in establishing cleaner energy and combating climate change in cities through their use in electric vehicles.

The most common rechargeable sources of electrical energy are VRLA batteries using AGM or GEL technology. They are found everywhere, from simple applications such as solar power systems and alarms to critical loads in medical and industrial systems.

Some key characteristics worth knowing about this type of battery are outlined below:

Low internal resistance

The particularly low internal resistance allows AGM batteries to deliver high currents on demand and achieve a long service life, even in deep-discharge use. This distinguishes them from other battery types, allowing them to recharge fully even after discharges exceeding 50% of their charge. Their thick lead plates resist corrosion. Note that AGM batteries for UPS systems are designed for standby use; dedicated deep-cycle series are available for frequent deep cycling, as in solar power applications. They therefore stand out for their durability and long service life.

Sealed construction

Once sealed, these batteries do not need maintenance. They remain sealed, requiring little or no human intervention apart from tasks such as external cleaning.

AGM technology

AGM stands for Absorbent Glass Mat, indicating that this type of battery contains a mat of borosilicate glass fibers. The battery electrolyte is held within it, preventing leakage if the casing breaks. Between the lead plates of AGM batteries is a porous glass-fiber material soaked in sulfuric acid solution. This results in very little gas being produced during the chemical reaction, and that gas is recombined inside the battery. They are therefore ideal for indoor spaces or remote installations where regular monitoring is difficult.

These plates are also solid and withstand more vibration than those in other battery types. Compared with calcium batteries, AGM VRLA batteries offer the following advantages:

How many years does an AGM battery last?

How they differ from GEL batteries

AGM batteries are often confused with GEL batteries. GEL batteries contain a silica gel that holds the electrolyte. This allows ions to move between the plates while preventing leakage if the battery breaks. The confusion arises because the two types have many characteristics in common. Both are non-spillable, both support deep discharge, and both can be used in almost any application. The difference in cost, however, makes AGM batteries a much more attractive choice!

AGM GEL
Electrolyte Absorbed into glass fibers In gel form
High currents over a few minutes (UPS) Excellent Good
Frequent deep cycles Good (deep-cycle series) Very good
Cost Lower Higher
Typical use UPS systems, alarms, vehicles Solar power systems, low-speed electric vehicles

A wide range of applications and systems

AGM VRLA batteries are widely used, meeting both straightforward and highly demanding needs. Examples include starting applications, cars, motorcycles, solar power systems, alarms, electric toys, electric bicycles, wheelchairs, cash registers, handheld vacuum cleaners, medical equipment and facilities, and more.

Find out more about our VRLA AGM battery series here.

For extended-runtime applications and large UPS systems, the Tescom XMS LP series is also available. For lithium UPS systems, see our comparison of lead-acid and lithium batteries.

Frequently asked questions

What is an AGM battery?

A sealed lead-acid battery (VRLA) with the electrolyte absorbed into a glass-fiber mat. It does not need topping up with water and can be installed indoors.

How many years does an AGM battery last in a UPS?

Usually 3–5 years for general-purpose batteries and up to 10–12 years for long-life series at 20–25°C. They last significantly less time in warm spaces.

AGM or GEL for a UPS?

AGM is preferred for UPS systems because it performs better when delivering the high currents a UPS needs for a few minutes, and it costs less.

Does an AGM battery need maintenance?

It does not need topping up with water. However, its condition should be checked and its runtime tested, ideally once a year.


Need a battery for your UPS or a battery check? Contact Tescom Hellas.

Was this helpful?

Terms in this article

Related questions